Product Description
Millett Angle-Loc Detachable Aluminum Rings & Bases on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for Millett Riflescope Mounts, Rings & Bases. MILLETT ANGLE-LOC DETACHABLE ALUMINUM RINGS & BASES
| Price: |
$15.95 & eligible for FREE Super Saver Shipping on orders over $25. Details |
| as of Thu, 21 Feb 2013 06:02:26 GMT ***Remember, deals price on this item for sale just for limited time*** | |
Product Details
- Size: 30mm - Low
- Color: Matte
- Brand: Millett
- Model: DT00704
- Released on: 2010-02-05
- Number of items: 1
Features
- Riflescope Accessory
- Detachable
Customer Reviews
Most helpful customer reviews
5 of 6 people found the following review helpful.
By P. Reck
I believe these are decent rings at a decent price here on Amazon, HOWEVER:
(Disregard this post if you are looking for see-through ring mounts as the following post does not apply.)
I am not a "gun expert", but this might be helpful information if your not familiar with scopes and rings, etc. Please confirm this for yourself, because I could be wrong.
A part number on this item might help a lot. This is a pretty good quality item (esp. for rim fire rifles) and good manufacturer in general, however these look like LOW rings which may be good for Objective Lens sizes under 30 MM size (definitely under 40mm) and would probably work well with an old-style straight 1" tube scope.
(Note: The Objective Lens is NOT the end you look into.)
Low height rings maybe may work with Objective Lens under 30MM in Dia.
Medium maybe works with Lens around 30-40MM
High maybe works with 50 MM or larger.
Millet has rings specifically numbered and specified for different firearms (see part numbers below).
This is all a guess, BECAUSE IT DEPENDS on other factors:
The mount and ring height "partly determines" the clearance between the bottom of the Objective lens to the firearm barrel. Ring height may also be influenced by the firearm dimensions: the height from the top of the receiver (or the mounting base with a weaver / picatiny rail) down to the high point of the barrel at the receiver. (The "height" refers to the "up and down", "vertical", or "Z" dimension).
Millet Detachable Mounts - general published height dimensions (height measured from top of weaver rail to bottom of 1" tube of scope) are as follows:
Low .115
Med .220
High .470
For example, say your were looking for rings to mount a Meuller 4.5-14x40MM AO 1" tube Silver Scope on a Ruger 10/22 Carbine (Standard .820 barrel). See [...] for scope dimensions. Say the 10/22 has a standard Weaver style rail mounted on the top of the receiver, which adds no height to the base of the rings up off the top of the receiver.
The objective bell of the Mueller scope is 2.07" in dia. (O.D.), so we take half of that, which is 1.035" minus half of the 1.0" O.D. scope tube (that will be in the ring)or 1.035-.5=.535 which gives us the difference from the bottom of the scope tube to the bottom of the Objective Lens Bell. So .535" is the height we need to be clear of, as measured from the bottom of the 1" tube. So... The approximate drop in height from the top-of-the-Weaver-rail (mounted on the receiver of the 10/22) to the section of the barrel where the Object Bell will be hovering over is about 3/8" (or .375). (Note: Remember most barrels are tapered, and consider possible interference with fixed sights too, if present.) The offset of the Millet Medium height ring from the top-of-the-Weaver-rail up to the bottom of the scope tube is published as .220". So, .220+.375=.595" offset giving us a clearance of .595-.535=.075" (a very close clearance at under 1/16"). So if the calculations are correct, the LOW Millet ring would never work, as the medium ring just makes it by a few hairs. Also consider that the small clearance with the Millet Medium Height Rings and this particular scope example might make it difficult, if not impossible, to use a front lens cover.
I believe we would require a medium or high set of rings to keep the 40MM lens from interfering with the top of the barrel. (so one might choose: Millett Part# DT00908, which is called: " 1" Medium Silver .22 Cal Detachable, Clam" -- see part numbers below). The High Millet rings would increase the clearance (or gap between the scope Objective Lens Bell and Barrel)) by another 1/4", which might be something to consider with this example Mueller 40mm Objective Bell, especially if you ever wanted to put caps over the end s of the scope.
Without the part number included in the listing above, one can only guess it is the LOW height model from the item photo and other buyer's comments, who said it was not high enough and did not work for his scope(ibid).
It also might depend on where the shooter's normal repeatable cheek weld on the stock of the rifle puts their eye or where the shooter feels comfortable. Many people do not like see-through rings because of this, because it puts the scope too high to get a normal cheek weld.
There are also some posts online for different scopes and firearms (blogs, youtube, manufacturers websites, etc.) to refer to. If someone has the scope and rifle in hand, they can measure them and try to obtain some dimensions online for the rings. People can also reach out to a gunsmith and ask about their specific combination of gear, as not to blow more dollars on a useless new item (some rings can cost more than some scopes).
Good Luck, I hope this post helps someone.
Some good online posts I have found regarding scope ring sizing:
[...] [...]
Millett Part Numbers:
Millett AL00019 1" Medium Bright Aluminum Vertical Split, Clam
Millett AL00020 30mm Medium Bright Aluminum Vertical Split, Clam
Millett AL00719 1" Medium Matte Aluminum Vertical Split, Clam
Millett AL00720 30mm Medium Matte Aluminum Vertical Split, Clam
Millett AL00919 1" Medium Silver Aluminum Vertical Split, Clam
Millett BB00715 Matte Browning, A-Bolt Two Piece Base, Clam
Millett BB00716 Matte Browning, BLR,BAR Two Piece Base, Clam
Millett CP40702 1" Medium- Alum Matte Remington 700 Series, Combo Base & Rings, Detachable, Clam
Millett CP40704 1" Medium- Alum Matte Remington 7400, Sig AMT, Combo Base & Rings, Detachable, Clam
Millett CP40706 1" Medium- Alum Matte Marlin, Combo Base & Rings, Detachable, Clam
Millett CP40708 1" Medium- Alum Matte Savage 110, Combo Base & Rings, Detachable, Clam
Millett CP40712 1" Medium- Alum Matte Browning A-Bolt, Combo Base & Rings, Detachable, Clam
Millett CP40714 1" Medium- Alum Matte Browing BAR,BLR, Combo Base & Rings, Detachable, Clam
Millett CP40716 1" Medium- Alum Matte FN Mauser, Combo Base & Rings, Detachable, Clam
Millett CP40718 1" Medium Matte CVA Octagon, Combo Base & Rings, Detachable, Clam
Millett CP40726 1" Medium- Alum Matte Ruger 10/22, Combo Base & Rings, Detachable, Clam
Millett CP40728 1" Medium- Alum Matte Remington 740, 42, 60, Combo Base & Rings, Detachable, Clam
Millett CP40730 1" Medium- Alum Matte Winchester 70, Combo Base & Rings, Detachable, Clam
Millett CP40912 1" Medium- Alum Silver Browning A-Bolt, Combo Base & Rings, Detachable, Clam
Millett CP40918 1" Medium Silver CVA Octagon, Combo Base & Rings, Detachable, Clam
Millett CP40922 1" Medium Silver Knight MK-85, Combo Base & Rings, Detachable, Clam
Millett CP40924 1" Medium Silver Knight Wolverine, Combo Base & Rings, Detachable, Clam
Millett CP40925 1" Medium- Silver Remington 700 Series, Combo Base & Rings, Detachable, Clam
Millett CP40930 1" Medium Silver Winchester 70, Combo Base & Rings, Detachable, Clam
Millett CV00702 Matte CVA, Traditions, Round Receiver Two Piece Base, Clam
Millett CV00901 Silver CVA, Traditions, Octagon Two Piece Base, Clam
Millett CV00902 Silver CVA, Traditions, Round Receiver Two Piece Base, Clam
Millett DT00001 1" Low Bright Detachable, Clam
Millett DT00002 1" Medium Bright Detachable, Clam
Millett DT00003 1" High Bright Detachable, Clam
Millett DT00701 1" Low Matte Detachable, Clam
Millett DT00703 1" High Matte Detachable, Clam
Millett DT00704 30mm Low Matte Detachable, Clam
Millett DT00705 30mm Medium Matte Detachable, Clam
Millett DT00706 30mm High Matte Detachable, Clam
Millett DT00708 22 Cal Medium Matte Detachable, Clam
Millett DT00709 22 Cal High Matte Detachable, Clam
Millett DT00901 1" Low Silver Detachable, Clam
Millett DT00902 1" Medium Silver Detachable, Clam
Millett DT00903 1" High Silver Detachable, Clam
Millett DT00908 1" Medium Silver .22 Cal Detachable, Clam
Millett DT00909 1" High Silver .22 Cal Detachable, Clam
Millett FN00705 Matte FN Mauser Series, Interarms Mark X Two Piece Base, Clam
Millett KN00902 Silver Knight, Wolverine Two Piece Base, Clam
Millett MB00708 Matte Marlin 336,30AS Series One Piece Base, Clam
Millett RB00707 Matte Remington 7400, 7600, 4 , 6 One Piece Base, Clam
Millett RB00708 Matte Remington 740, 742, 760, SAV170 One Piece Base, Clam
Millett RU00701 Matte Ruger 10/22 One Piece Base, Clam
Millett SB00710 Matte Savage 110 Two Piece Base, Clam
Millett SB00711 Matte Savage 110 Accutrigger Two Piece Base, Clam
Millett SB70710 Matte Remington, 700 Series Two Piece Base, Clam
Millett SB70910 Silver Remington, 700 Series Two Piece Base, Clam
Millett TP00010 30mm Medium Bright .22 Caliber Aluminum Vertical Split, Clam
Millett TP00709 1" Medium Matte .22 Caliber Aluminum Vertical Split, Clam
Millett TP00710 30mm Medium Matte .22 Caliber Aluminum Vertical Split, Clam
Millett TP00909 1" Medium Silver .22 Caliber Aluminum Vertical Split, Clam
Millett WB70706 Matte Winchester & Marlin MR-7, 70 Series Two Piece Base, Clam
Millett BB01002 Smooth Browning, X-Bolt Two Piece Base, Clam
Millett BB01702 Matte Browning, X-Bolt Two Piece Base, Clam
1 of 1 people found the following review helpful.
By VZ-58_Man
These are well made Aluminum 30mm Rings. I am in the process of removing steel rings with these aluminum rings because of weight. Mounting 2 flash lights on 7.63x39mm VZ-58s and AKs which don't have killer recoil! They are machined good and I'm mounting flashlight on side with 1" rings. Price very good!
0 of 0 people found the following review helpful.
By David Ryan
Worked as promised. I ordered the low mounts so I could mount a 40 mm scope as low to the barrel as possible without touching. So far, so good.
No comments:
Post a Comment